[ Back | Print ]
Technical Information Document
Unable to bind IPX on server. - TID10073957 (last modified 15JAN2003)
printer friendly tell a friend
Click here if this does not solve your problem
10073957 10073957 10073957
fact

Novell NetWare 6.0

Novell Small Business Suite 6.0

symptom

Unable to bind IPX on server.

IPX won't load on server.

Error: "Attempt to bind IPX LAN protocol to Intel(R) 8255x-based Network connection failed.  (error=FFFFFF85)"

cause

No ServerID was set in the AUTOEXEC.NCF because IPX was not a selected protocol during server install.  The server id is the internal IPX number, and is required for IPX communications.  It is not created if the server is installed wth IP only.   

fix

If NetWare 6 is installed without IPX selected, the server will not assign a SERVERID number.  If you want to bind IPX after the install, you'll have to assign a SERVERID.  This can be done at the console prompt by typing "serverid <id>."  Be sure to then add this line to the AUTOEXEC.NCF file.  Add the following line to the AUTOEXEC.NCF after the line for File Server Name:
SERVERID 12345678     (enter your own server id number.  By default this is an 8 digit number.)

Document Title: Unable to bind IPX on server.
Document ID: 10073957
Solution ID: NOVL81866
Creation Date: 28AUG2002
Modified Date: 15JAN2003
Novell Product Class: NetWare

Disclaimer

The Origin of this information may be internal or external to Novell. Novell makes all reasonable efforts to verify this information. However, the information provided in this document is for your information only. Novell makes no explicit or implied claims to the validity of this information.

Any trademarks referenced in this document are the property of their respective owners. Consult your product manuals for complete trademark information.

[ Back | Print ]